☆
☆
☆
☆
☆
☆
☆
☆
8
CLEANING
1. Cleaning the appliance
Interior accessories:
Remove all the brackets, door racks, etc. Use a soft
cloth to clean the appliance.
Door gasket:
The door gasket can be taken off. Clean it with neutral
detergent, then install it into the door to its
former position.
2. Attention items
Clean the appliance every two months to keep both
interior and exterior clean.
Disconnect the power supply before cleaning, wash it
with neutral detergent and then dry it. The door gasket
should be cleaned carefully especially if it is contaminated.
Cleaning the door gasket can prolong the lifetime of the
Do not use hot water, eradicators, acid, basic detergent,
fancy soap, petrol, alcohol, organic solvents, or a brush.
It’s not allowed to wash the appliance with water
directly in order to prevent rusting.
Check the plug and power cord whether they are
damaged.
If you do not intend to use the appliance for long periods
of time, disconnect the power supply, take out the food
and clean the appliance. Leave the door slightly open,
and place the appliance in a dry and ventilated
environment.
9
NON-TROUBLE PHENEMENON
Please check the following items before you require
a service call.
Problems
Reason
The noise of liquid
is heard
This is a normal condition to hear the
refrigerant flow during the operation and
when it is not working.
Silvery noise
It is the noise of the injection mold when
it expands or shrinks.
Noise of compressor
when it starts
to work
It is the normal noise when the compressor
is operating, especially when it starts and
shuts down.
It’s wet outside or
around the door
There may be slight drips on the surface of
the appliance in drippy days, it’s the same
reason as there will be drips on the surface
of a glass of ice water.
The surface of the
appliance becomes
hot
It’s a normal situation if the temperature of the
rear wall grows when the appliance
starts to work in summer. It does not
mean that something is wrong and it has
no influence on the appliance.
appliance.
