Parts Location Diagram
Installation Steps
Step 1
717mm T-type Joint
Three-way
Joint
Three-way
Joint
Three-way
Joint
T-type Joint
T-type Joint
T-type Joint
717mm
717mm
717mm
917mm
917mm
917mm
917mm
639mm
639mm
Suction Cup
Joint
Suction Cup
Joint
Suction Cup
Joint
717mm
717mm
717mm
717mm
T-type Joint
T-type Joint
T-type Joint
T-type Joint
917mm
917mm
917mm
917mm
Suction Cup
Joint
Suction Cup
Joint
Suction Cup
Joint
Suction Cup
Joint
As shown in the figure, place 4 lower pipes (917mm) and 4 lower pipes
(717mm) around the cloth cover, then put 4 T-type joints in the middle, and 4
suction cup joints at the four corners of the cloth cover.
Step 2
Step 3
T-type Joint
T-type Joint
T-type Joint
T-type Joint
Note: Start from the middle and then both sides.
The lower pipes are fully inserted into the cloth cover, connected to the T-type
joints as shown by the red arrow. Then install the suction cup joints at the four
corners.
Use 8 upright column pipes(639mm) to pass through the cloth cover first, and
install them on the three-way joints and suction cup joints in the direction
indicated by the red arrow.
639mm
639mm
639mm
639mm
639mm
639mm
639mm
639mm
04
05
