ON/OFF AIR SWITCH
Some whirlpool baths pumps are equipped with an on-off air switch. Each
depression of the switch will actuate the pump. If off, one depression will turn the
pump on, if on, the next depression will turn it off.
Blower
Speed
Wave
Jets
Speed
Wave
Switches the
jet-pump on or off
Adjusts the variable
water-flow of the jets
Switches from continuous
to wave action water-flow
Switches the
air-blower on or off
Adjusts the variable
air-flow of the blower
Switches from continuous
to wave action air-flow
Illustration J
TOTAL MASSAGE BATHS
Total Massage units are a combination of whirlpool and air massages. The top three controls on the “Therapy
Control Center” operate the whirlpool and the bottom three controls operate the air system. The whirlpool and
air massage systems may be used at the same time if desired.
The whirlpool is controlled by the top three-button control.
1. The button on the left switches the pump on or off. The other features will not operate unless the pump is
turned on.
2. The middle button sets the power level of the pump. Holding the button depressed will cycle the pump
power from low to high in a continuous cycle. When the desired level is reached, remove your finger quickly
from the button to maintain that power setting.
3. The button on the right is a three-step wave action button:
a. Position #1 operates the pump at a steady flow.
b. Position #2 operates the pump at a quick wave action.
c. Position #3 operates the pump with a slower wave action.
The air bath is controlled by the bottom three-button control.
1. The first button switches the blower on or off. The other features will not operate unless the blower is
turned on.
2. The second button sets the power level of the blower. Holding the button depressed will cycle the blower
power from low to high in a continuous cycle. When the desired level is reached, remove your finger quickly
from the button to maintain that power setting.
3. The third button is a three-step wave action button. Once activated, the air holes expel air in a slow
pulsating flow called wave action. There are 3 steps or positions for wave strength.
a. Position #1 operates the blower at a steady flow.
b. Position #2 operates the blower at a quick wave action.
c. Position #3 operates the blower at a slower wave action.
