CHARGING AND RECHARGING THE INTERNAL BATTERIES:
This product has been shipped partially charged. Charge the unit right out of the box and before the first use.
Charging and Recharging all 3 lights simultaneously using the AC Wall Charger and the USB Charging
Cable (included).
1.
Attach both Worklights
(5)
by inserting each Bracket Guide
(16)
fully and securely into the Worklight Carriage Track
(15)
.
2.
Insert the Regular USB Plug of the USB Main Charging Cable
(19)
into the USB Port of the AC Wall Charger
(20).
3.
Lift the Charging Port Compartment Dust Cover
(A)
and swing it completely open to expose the USB Charging Port
(2).
Insert the Micro USB Plug of the USB Main Charging Cable
(19)
into the USB Charging Port
(2)
.
4.
Plug the AC adaptor into a 110 or 220 Volt AC outlet.
5.
The Battery Charging Status Indicator Bars
(3)
on the unit will illuminate according to the charging status of the internal
battery. In addition, both Worklights Charging Status LED will illuminate RED.
6.
Charge the unit until all 4 bars of the Battery Charging Status Indictor LED
(3)
illuminate without flashing and both
Worklight Charging Status LED
’
s illuminate GREEN.
IMPORTANT: BOTH WORKLIGHTS (SIDE LIGHTS) WILL NOT TURN ON DURING THE CHARGING PERIOD. ONLY
THE SPOTLIGHT (BOTTOM LIGHT) WILL TURN ON IF THE MAIN POWER ON/OFF BUTTON (1) IS PRESSED.
NOTE: The internal battery must be charged every 6 months, even if the unit is not in use.
Charging and Recharging Worklight and Spotlight using USB Charging Cable (included).
1.
Insert the Main Charging Cable
(19)
Regular USB Plug into the USB Port of a desktop, laptop, or any enabled USB
accessory power port, such as a power bank.
2.
Lift the Charging Port Compartment Dust Cover
(A)
and swing it completely open to expose the USB Charging Port
(2).
Insert the Micro USB Plug of the USB Main Charging Cable
(19)
into the USB Charging Port of the unit
(2)
.The Battery
Charging Status Indicator Bars
(3)
on the unit will illuminate according to the charging status of the internal battery. In addi-
tion, both Worklights Charging Status LED will illuminate RED.
3.
Recharge the unit until all 4 bars of the Battery Charging Status Indictor LED
(3)
illuminate blue without flashing and both
Worklight Charging Status LED
’
s illuminate GREEN.
IMPORTANT: BOTH WORKLIGHTS (SIDE LIGHTS) WILL NOT TURN ON DURING THE CHARGING PERIOD. ONLY
THE SPOTLIGHT (BOTTOM LIGHT) WILL TURN ON IF THE MAIN POWER ON/OFF BUTTON (1) IS PRESSED.
Page 5 of 10
19
2
3
USB PORT
19
2
3
20
14
14
A
A
