![Costcare B120C User Manual Download Page 4](http://html.mh-extra.com/html/costcare/b120c/b120c_user-manual_2671092004.webp)
3
Regular maintenance of bed and accessories is necessary to ensure proper operation.
DO NOT overtighten mounting hardware. This will damage mounting brackets.
1.4
Electrical and Earthing
EARTHING
DO NOT, under any circumstances, cut or remove the earthing prong from any plug.
Some devices are equipped with three-prong (earthing) plugs for protection against
possible shock hazards. Where a two-prong wall receptacle is encountered, it is the
personal responsibility and obligation of the customer to contact a qualified electrician
and have the two-prong receptacle replaced with a properly earthed three-prong wall
receptacle in accordance with the regional and national regulations. If you must use
an extension cable, use ONLY a three-wire extension cable having the same or higher
electrical rating as the device being connected.
DO NOT use if the power cable is cut, frayed or loosely connected to the device. Power
supply cable may be damaged by inappropriate handling, e.g. by kinking, shearing or
other mechanical damages. The POWER SUPPLY CABLE is only replaceable by SERVICE
PERSONNEL.
1.5
Disposal
This product has been supplied from an environmentally aware manufacturer.
Where backup battery is used, DO NOT dispose of batteries in normal household
waste. They MUST be taken to a proper disposal site. Contact your local waste
management company for information.
This product may contain substances that could be harmful to the environment if
disposed of in places (landfills) that are not appropriate according to legislation.
Please be environmentally responsible and recycle this product through your recycling
facility at its end of life.
1.6
Radio Frequency Interference
Most electronic equipment is influenced by Radio Frequency Interference (RFI).
CAUTION should be exercised with regard to the use of portable communication
equipment in the area around such equipment. If RFI causes erratic behavior, switch
the power OFF IMMEDIATELY. DO NOT turn the Power Switch ON while transmission
is in progress.