Part 1 – Introduction
12
Rear Panel
!
6
8
3
7
9
1
2
4
5
0
1
Factory Reset Button
2
Audio Ports
3
VGA Out Port
4
HDMI Out Port
5
eSATA Port
6
Power In Port (48V)
7
Video In / PoE Ports
8
Network Port
9
Alarm Connection Ports
0
RS-232 Port
!
Power In Port (12V)
@
Rear Panel Connections
Factory Reset
Located next to the Audio Out port on the rear of the
NVR is a switch that, once activated, will reset the NVR to
all its initial factory settings.
A factory reset will clear all NVR settings configured by
the user.
You will need a straightened paper clip to access the
factory reset button.
1
Turn off the NVR.
2
Insert a straightened paper clip into the factory reset
switch hole and press the switch. Turn on the NVR
while holding the switch.
3
Press and hold until you hear 2 beeps from the NVR's
internal buzzer.
4
All NVR settings will be returned to their factory
values once you remove the paper clip.
Audio Connection
Connect the speaker with a built-in amplifier to the
AUDIO OUT
port. Use the
AUDIO OUT
port to listen to
audio from network cameras.
•
This NVR does not feature a built-in audio amplifier
unit and therefore requires the user to purchase a
speaker system with a built-in amplifier separately.
•
Check your local laws and regulations on making
audio recordings.
