15
User Manual
6.0 Factory Defaults
7.3.3 Site
Select the "Site Settings" tab to enter the site settings interface, the current site has been
created, as shown below:
You can view the field parameters that have been set to create field points, modify and delete
created field points.
【
Site NO
】
1-255, the administrator user supports up to 255 site management;
【
Type
】
The type of control protocol can be set, denoted by the number N. Currently it
supports 1-PENET and 2-NVR. PENET can control the matrix. The NVR can be customized
according to the specific protocol. (Optional Customization required)
【
Main Information
】
IP address of the controlled device;
Site creation / modification example illustration:
Points: 2
Proceed as follows:
Enter 2 + ENTER to enter "modify / create" interface, as shown below:
In this interface, you can select the type of control protocol. Select "1" control matrix. After
selecting the type, press ENTER to enter the setting interface. You can set parameters such as
"port", "IP address" and "command sending interval" of the matrix.
Summary of Contents for CVI5000
Page 2: ...User Manual 2 ...
