14
Note: It is important that you set the dip switch settings for the dome address,
communication parameters and protocol BEFORE you install the dome in its physical
location of operation.
2.5 Attaching the dome to the bracket
Step 1
:
Locate the small plastic bag
containing the O-ring,
adapter, screws, and small screwdriver as illustrated.
Step 2
:
Install the O-ring onto the wall bracket as illustrated.
Step 3
:
Install the adapter onto the top of the dome as
illustrated.
Step 4
:
Suspend the dome to the bracket using the stainless
hook as illustrated.
Step 5
: C
onnect the end of the wiring harness protruding out
of the bracket to the mating connector on the dome
unit. Observe proper orientation of the connectors as
illustrated.
Step 6
:
Push the dome into the bracket and align the holes.
Using the supplied screws (with the two rubber
O-rings) secure the dome in place as illustrated.
When finished the dome should look like the illustration on
the right ready to be powered up.
