13
2.4 Wall bracket installation.
Step 1
:
Feed the supplied wiring harness through the channel inside the wall bracket as
illustrated in Fig. 13. Verify that the 6 pin connector is remaining outside the
opening of the bracket as illustrated in Fig. 14.
Fig. 13 Fig. 14
Step 2
:
Affix the wall bracket to the wall as illustrated in Figure 15 verifying that the
surface you are attaching to can support the weight of the dome using either expanding
anchors or butterfly fasteners.
Fig. 15
Fig. 16
Note: Different bracket options may be available. Illustrations are for reference purposes only and may vary
from actual package contents depending selected installation options at time of order.
