background image

FCC COMPLIANCE STATEMENT

 

This device complies with Part 15 of the FCC Rules. Operation is subject to 

the  following  two  conditions:  (1)  this  device  may  not  cause  harmful 
interference,  and  (2)  this  device  must  accept  any  interference  received, 
including interference that may cause undesired operation. 

 

FCC  INFORMATION: 

This  equipment  has  been  tested  and  found  to 

comply with the limits for a Class A digital device, pursuant to Part 15 of the 
FCC Rules. These limits are designed to provide reasonable protection against 
harmful  interference  when  the  equipment  is  operated  in  a  commercial 
environment. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instruction manual, 
may  cause  harmful  interference  to  radio  communications.  Operation  of  this 
equipment in a residential area is likely to cause harmful interference in which 
case the user will be required to 

 

correct the interference at his own expense. 

 

CAUTION: 

Changes or modifications not expressly approved by the party 

responsible  for  compliance  could 

void  the  user’s  authority  to  operate  the 

equipment.  

This Class A digital apparatus complies with Canadian   ICES-003. 

 

Cet appareil nume` rique de la classe A est conforme a´ la norme NMB-003 

du Canada.  

CE COMPLIANCE STATEMENT

 

WARNING

 

This is a Class A product. In a domestic environment, this product may cause 

radio interference in which case the user may be required to take 

 

adequate measures. 

CAUTION

 

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. 

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. 

 

3

 

Summary of Contents for CCI2143HSB

















Reviews: