Cosori CP530-VS, User Manual

Page: 8 / 20

8
Vacuum Sealing a Bag
1. Open the lid.
2.
Carefully place items into the vacuum
bag. Make sure there is at least 2 in
(5 cm) of room between the bag
contents and the opening.
Do not
overfill. [ Figure 2.1 ]
3. Place the bag opening into the vacuum
chamber.
NOTE:
• Make sure the opening of the bag is not
too wet. Overly wet bags may not seal
properly.
• Flatten the opening of the bag. There
should be no folds or foreign objects in
the bag opening.
• When vacuum sealing bulky items,
gently stretch the bag flat while
inserting it into the vacuum chamber
and hold the bag until the pump begins
to work.
• The vacuum bag can be placed in the
vacuum chamber with either side up.
• Make sure the bag opening is fully
inside the chamber, or air may be left
inside the bag.
[ Figure 2.2 ]
4. Close the lid. Press down on both
corners of the lid to lock. [
Figure 2.3 ]
You should hear a click from each
corner.
Figure 2.3
Figure 2.1
Figure 2.2
at least
2 in (5 cm)
of space
Click!
Click!