Jets make Noise when in Operation
Make sure Pump Impellers
are installed correctly.
Make sure water level is
above impeller housings.
No Hot Water in Biarritz Basin
Check for Hot water on
feed pipe to Biarritz.
Make sure Main Valve on
Biarritz is fully open.
Make sure Hot Water feed from
Main Supply is connected to
Hot Water input on Biarritz.
Make sure Thermostatic
valve is fully clockwise.
No Cold Water in Biarritz Basin
Check for Cold water on
feed pipe to Biarritz.
Make sure Main Valve on
Biarritz is fully open.
Make sure Cold Water feed from
Main Supply is connected to
Cold Water input on Biarritz.
Make sure Thermostatic valve is
fully counter- clockwise.
Valves make “squealing” Noise
Check water pressure
from Main Lines.
Nominal Water Pressure
Should be 40-60 PSI.
IMPORTANT NOTE:
All of the above in this Troubleshooting Guide applies to the European Model
Also. The only difference is the applied Primary Power. That Power is 230 volts
AC, 50 Hz.
Troubleshooting Guide
Biarritz™ Installation Manual v.1.3 - 30
Product Code: LM917135
www.spaequip.com
P: 707.737.1100 F: 707.737.1150
Page 18 of 18
