CEB-V850ES/FJ3·SJ3 Evaluation Board HardwareUser’s Manual
25
3.3.14 The connector for FL-PR4, FL-PR5, MINICUBE2 (CN5)
It is a connector for connecting MINICUBE2 which is a target CPU debugger.
Moreover, it is as common as the connection connector of FL-PR4 or FL-PR5 which is a FLASH write-in
tool with a built-in CPU.
PinNo. Signal
V850ES/FJ3
1 GND
GND
2 _RESET _RESET
3
SI/RxD
P40/SIB0 or P31/RXDD0
4 VDD
EVDD
5
SO/TxD
P41/SOB0 or P30/TXDD0
6 VPP
N.C.
7 SCK
P42/SCKB0
8 H/S
PCM0
9 CLK
N.C.
10 VDE
N.C.
11 VDD2
N.C.
12 FLMD1
N.C.
13 RFU-1
N.C.
14 FLMD0
FLMD0
15 /RESETin N.C.
16 N.C.
N.C.
Table 3.3.14
The "/RESETin" of a No. 15 pin is the reset signal passed to MINICUBE2. It is not used at the time of
FL-PR4 / FL-PR5 connection.
*After connection with CN5 and CN6 connector and separation check that a power supply is OFF, please
carry them out. There is a possibility that an evaluation board, a debugger, etc. may be damaged.
