Service Manual Ponygraphic
Chapter 6
Service Procedures
6.2
6. Service Procedures.
6.1. Consumable
Replacement
6.1.1. Disassembling the Pony graphic
It is necessary to open the unit for repair and adjustment , the procedure described bleow
deals with the disassembling of the pony graphic unit.
(1) Flow
meter
1. Remove the Turbine from the Optoelectronic Transducer as described in the Pony
graphic User's Manual.
2. Remove the 2 screws and open the cases to access the internal parts as shown in the
following figure.
Optoelectronic Transducer
Board
Screw
(2)
Pony graphic unit
Remove the 4 rubber pins from the bottom of the Unit, take off the 4 screws and open the
cover;
Rubber pin
Mother Board
fixing screws
Rear Cover
fixing screw
Top Cover
After removing the Rear cover you may remove the following sub-assemblies:
•
Mother Board fixed with 4 screws to the top cover;
•
Keyboard
fixed with 2 screws to the top cover;
•
[Power Supply Board fixed to the Mother Board];
•
Printer fixed to the Mother Board;
•
LCD Display fixed to the Mother Board
