12
Gebruiks- en montagehandleiding Cosiconcrete / Operating and assembly instructions Cosiconcrete / manuel de montage et mode démploi Cosiconcrete
Replace the hose or pressure regulator so that they are mounted on the exact same way. In the Netherlands, a
30 mbar pressure regulator should be placed. The hose must not be longer that 2.5 meters.
When in doubt, always consult a qualified gas engineer .
5. Replacing the battery for the piezo ignitior
The Cosiconcrete features a piezo ignition that runs on one AA battery . It may happen that after repeated use ,
the battery runs out . The battery can be replaced as follows :
-
Make sure the model, ceramic logs and lava rocks are completely cooled down.
-
Make sure the Cosiconcrete is no longer connected to the gas cylinder.
-
Behind the control panel, there is the ignitor, the battery is in the black capsule.
-
You can now rotate the black ignition and open the battery as instructed in the sites of inflammation
-
The old battery should be returned to a collection point .
6. Moving the unit
It is advisable to minimize the move with Cosiconcrete. With every move you risk to damage the Cosiconcrete.
If you still want to move the unit , make sure that the Cosiconcrete is locked off from the gas bottle. The new
location for Cosiconcrete needs to be clean, flat and hardened again.
7. Installing the cover
At each Cosiconcrete is a protective cover supplied. The protective cover protects your Cosiconcrete against
weather influences. It is always advised to use the sleeve. Place the cover only when the Cosiconcrete has
completely cooled down. If you place the cover immediately after using the cover will damage and even catch
fire .
