Cosen SH-510LDMM, Instruction Manual

Page: 42 / 88

4-6
5. Projection lamp ON/OFF
OFF /
ON : When the mode is selected, projection lamp will
OFF.
6.
Hydraulic ON/OFF button
O ( Red) : Press this button to turn off the hydraulic motor immediately.
I (Green):
Press this button to turn on the hydraulic motor immediately.
7. Saw blade ON/OFF button
O ( Red) : Press this button to stop the blade.
I (Green):
press this button to start cutting.
8. Coolant / Spray switch
Coolant / Spray
Only SPRAY or Coolant can be selected.
9. Emergency stop button
Press this button to stop the machine in an emergency. When the button is pressed, it brings the
machine to a full stop. The button locks when pressed. In order to unlock it, please turn the button
clockwise.
10. Vise OPEN / CLAMP switch
When turning the switch to the left, the vises will open until the operator lets go of the button or
until the vises are fully opened. When turning the switch to the right, the vises will clamp until the
operator lets go of the button. Turn and hold the switch to the right for three seconds and let go of it;
the vise will automatically close until it is fully clamped.
11. Saw bow up button
When this button is pressed, the saw bow rises until the operator lets go of the button or until the
saw bow reaches the highest position and touches the upper limit switch. Under cutting mode, press
and hold this button for three seconds and the saw bow rises automatically to its highest position.
While pressing the saw bow up button can stop the running blade, please still use the
emergency stop button in an emergency.
12. Saw bow down button
When this button is pressed, the saw bow descends until the operator lets go of the button or until
the saw bow reaches the lowest position and touches the lower limit switch.