Cosen MT-105, Instruction Manual, Page: 3 / 16

These symbols and notes are referred to three categories
identified by the words:
CAUTION: behaviors that could cause serious
injury.
1.0 GETTING STARTED
Before starting work with your sawing machine please read this
instruction manual in order to learn about the machine - how to use
it and also not recommended action.
Keep this manual in an accessible place: it is an integral part of the
machine, and you must always refer to it to have best perform and
work in maximum safety. All operations are described in it.
Use the machine only and exclusively for uses specified below, use
the machine as recommended in this manual, and not trying in any
way to modify it or force it, or use it for purposes not stated.
1.1 LOCATION IN CORRESPONDENCE OF THE
POINTS OF USE
Do not underestimate the warnings "ATTENTION - CAUTION"
given in this manual.
In order to attract attention and to preserve safety, hazardous
operation are preceded by symbols and notes that point out the
danger and explain how to avoid danger.
CAUTION: behaviors that could cause minor
injuries or property damage.
1.2 SAFETY AND REGULATIONS
The machine is designed and built according to the requirements
imposed by existing Community Directives: 2006/42 / EC -
2004/108 / EC - 2006/95 / EC
NOTE: the notes preceded by this symbol have a
technical nature and simplify use.
The EC declaration of conformity together with the CE mark on
product are an integral part of the machine: they both guarantee
product conformity to safety Directives.
Essa può tagliare:
!
COMMON STEELS (Fe37)
1.3 TYPE OF USE AND CONTRAINDICATIONS
The band saw has been designed and built using the latest
technology, and they are able to meet all requirements of metal
cutting industry and trade.
1.0 GETTING STARTED
1.2 SAFETY AND REGULATIONS
1.3 TYPE OF USE AND CONTRAINDICATIONS
1.4 GENERAL SAFETY
INDEX
1.5 SAFETY RULES FOR RESIDUAL RISKS
1.6 INFORMATION ABOUT THE NOISE
1.1 LOCATION IN CORRESPONDENCE OF THE
POINTS OF USE
1.7 INFORMATION ON ELECTROMAGNETIC
COMPATIBILITY
1.8 DESCRIPTION OF THE MACHINE
2.0 INSTALLATION
2.1 UNPACKING
4.0 USE
2.5 ELECTRICAL CONNECTION
3.2 STOP BAR
4.3 REPLACING THE BLADE
4.6 CUTTING TABLE
2.4 POSITION / WORK PLACE
5.0 ACCESSORIES
5.1 CHOICE OF BLADE
6.0 MAINTENANCE
6.1 ROUTINE MAINTENANCE
3.3 CUTTING ANGLE
3.1 TENSION OF THE BLADE
3.4 SPEED 'CUTTING
3.6 BEARING RAIL GUIDE
4.1 RUNNING IN THE BLADE
4.4 CUTTING CAPACITY
2.2 HANDLING
3.0 ADJUSTMENTS
2.3 TRANSPORT
4.2 OPERATION
4.5 POSITIONING OF THE PIECE IN THE GRIP
3.5 RAIL GUIDE SLIDING
7.0 TROUBLESHOOTING GUIDE
WIRING
SPARE PARTS
6.2 ASSISTANCE
6.3 DISPOSAL OF THE MACHINE
Pag.3
Before starting the machine make sure
that the blade is fitted correctly and make
sure that the guards and covers are fitted
correctly. Please adjust the blade with a
suitable voltage to avoid dangers.
WARNING!