COSDEP MT28, User And Maintenance Manual

Page: 20 / 29

20
With pellet of beech and mixed fir
F V1 V2 V3 V4 V5
50 52 54 56 58
F V1 V2 V3 V4 V5
52 54 56 58 60
With pellet of hard beech
F V1 V2 V3 V4 V5
52 54 56 58 60
F V1 V2 V3 V4 V5
54 56 59 62 65
Industries providing the pellet does not produce it all in the same way, and the result may be a
pellet pressed more or less, more or less long, etc. .. etc. .., and the result is that the fall of the
pellets in the grate can be of different amount. How Cosdep, we program the fall of the pellets is of
160 seconds, this figure can be changed from the front screen commands, if the pellet is shorter
you should decrease the number of seconds (eg 160 to 120 seconds) if the pellet is pressed and the
longer
you have to increase the time.
To enter the EPROM to hold your stove - blue, just out in front eprom crush the green arrow to the
right and keep it pressed until the code gets to 103 then use the arrows or the other or down to
increase or decrease the seconds according to your needs.
6. CLEANING, MAINTENANCE AND REPAIRS
PREMISE: Opening of the lateral panels
For the eventual repairs to act in the following way
To remove the cable
from its connector,
pressing the lever
under the connector
To remove the above
cover
To unscrew the
screws hold together
the lateral coverings
To remove the
lateral coverings
6.1 EVERY DAY:
Cleaning the grate
1. Remove the grate and clean it. Use
a pointed tool to unblock the holes
2. Empty the ash box and vacuum
the box beneath
3. Vacuum the hole for the lighter
4. If necessary clean the glass and
the door