COSDEP MT28, User And Maintenance Manual

Page: 14 / 29

14
F1 SS 08:30 20°
P1 ON Enab.
Enter the temperature sequence. Using the UP
and DOWN keys select the desired temperature in
°C (in our example: 20). Press the RIGHT key
to
pass to the next sequence.
F1 SS 08:30 20°
P3 ON Enab.
Enter the menu for programming the stove power.
Using the UP and DOWN keys select the desired
programme number (in our example: 3) Press the
RIGHT key
to pass to the next sequence.
F1 SS 08:30 20°
P3 ON Enab. Enter the ignite/extinguish ON/OFF menu. Using the
UP and DOWN Keys select ON for ignition or
OFF for extinguishing (in our example: ON). Press the
RIGHT key
to pass to the next sequence.
F1 SS 08:30 20°
P3 ON Enab.
Enter the menu for setting enabled/disabled. Using
the UP
and DOWN keys select the desired
setting (in our example: Enab). Press the SET key to
save the setting and exit the menu.
If the programmed time band is disabled, the settings will be stored but the stove will ignore them.
To exit the WEEKLY PROGRAMME menu press the SET key several times. In this way you will skip
through all the time bands yet to be programmed. Make sure that, for each band that you skip
through, the key for enabling the programme is not pressed.
To scroll through the data quickly keep the corresponding key pressed: UP DOWN
RIGHT LEFT
5. THE TIMER COUNTDOWN MENU
If the house is to be left empty for several days, for work or holidays for example, or to switch the
stove on or off at times that are not included in the programmes for ignition and extinguishing, use
the Timer Countdown programme.
The programme enables a countdown of up to 99 hours from the departure time.
To enable the TIMER COUNTDOWN function proceed as follows:
example: programme for ignition with programme 3 in 94 hours’ time. Data inserted on Monday
morning at 09.00, the programme starts on Friday morning at 07.00.
With the display lit up, press the UP key 5 times to display the TIMER COUNTDOWN menu.
TIMER ON/OFF
Press the SET key to enter the display.
Timer ON Prog. 3
94 hours Enab.
You directly enter the sequence for igniting or
extinguishing the stove with the timer. With the UP
and DOWN keys
0
select the desired control (in
our example: ON). Press the RIGHT key to pass to
the next sequence.
Timer ON Prog. 3
Enter the recipe programme sequence. Using the UP