6
6. Assembly Instructions
1) Install the Front Stabilizer
Attach the Front stabilizer (27) to the Main frame (30) with two Bolts (21),
Φ
10 Flat washers (2),
Φ
10 spring washers(65) and Cap nuts (3). (Refer figure 1)
2) Install the Rear Stabilizer
Attach the Rear stabilizer (28) to the Seat cushion adjustor (4) with two Bolts (21),
Φ
10 Flat
washers (2),
Φ
10 spring washers(65) and Cap nuts (3). (Refer figure 2)
3) Install the Front Upright Tube
a. Thread the computer wire (56) and hand pulse(55) wire through the front upright tube(46).
b. Put the end of the resistance cable for the Tension control (52) into the spring hook of Tension
control wire (50) as shown on drawing
A
of figure 3.
c. Pull the resistance cable for the Tension control (52) up and force it into the gap of metal
bracket of Tension control wire (50) as shown on drawing
B
of figure 3.
d. Connect the resistance cable of Tension control (52) with the Tension control wire (50)
completed as shown on drawing
C
of figure 3.
e. Insert the Front upright tube (46) into the Plastic cover (51) and then pull the Plastic cover (51)
up. Insert the Computer wire (56) and the Sensor wire I (55) through into the bottom of Front
upright tube (46) and then pull them out from the top hole of Front upright tube (46).
f. Insert the Front upright tube (46) into the round tube of Main frame (30) and secure it with four
Bolts (14) and Arc washers (12).
h. Finally, pull down the Plastic cover (51) as shown on drawing
D
of figure 3.
