Cosco Home Gym CHG 03, Owner'S Manual

Page: 17 / 20

- 16 -
Assembly Instruction
Step 17
Step 18
CABLE DIAGRAMS
After the Machine is assembled, check whether the cable is tensioned. (At correct tension, there should be a
gap of 3-5mm between the Top Plate and the Weight Stack).
If the Cable is slightly loose, adjust it by tightening the Bolt at the top of the weight stack, or screw the M12
nut clockwise, as shown in figure.
If the Cable is very loose, adjust the Pulley to lower position on Pulley plate (#49)
Key No. Description Qty.
77 Washer 8 6
93 Hex Bolt M8*75 2
94 Hex Bolt M8*65 4