background image

3

4

Thank you for choosing this car seat, referred to throughout 
this manual as a child restraint. Dorel Juvenile Group, (DJG) 
is committed to creating convenient, comfortable, and 
dependable products for children.

No one can predict if use of a child restraint will prevent injury 
or death in a particular crash. However, combined with careful 
driving, proper use of a child restraint can lower a child’s risk 
of injury or death in most crashes.

Your child’s safety is worth the time it will take to read, 
understand and follow the instructions and warnings. 

After reading if you still have questions or concerns with 
the child restraint please contact our Consumer Relations 
Department.

On the back of the shell there is an expiry date for use of 
this child restraint. Do not use this seat after the expiry date.

A-1 

Thank You...

A. Before You Begin

Dorel Juvenile Group, Inc.

Website:  

www.djgusa.com

Email:  

[email protected]

Fax:  

1-800-207-8182

Mailing Address: 

Dorel Juvenile Group, Inc.

 

Consumer Relations Department

 

P.O. Box 2609

 

Columbus, IN 47202-2609  

Telephone: 1-800-544-1108

 

8 A.M. to 6 P.M. EST M-TH

 

8 A.M. to 4:30 P.M. EST FRI

A-2 

Dorel Juvenile Group Consumer

         Relations Contact Information

Although child restraints are tested, evaluated, and certified 
by the manufacturer and tested by Transport Canada, it 
is possible that a safety-related problem may be found. If 
there is ever a safety issue with your child restraint, we use 
registration information to reach owners.  

If you don’t have the card or if your 
address changes, you will find the model 
number, manufacture date, and line 
code on the label located on the back of 
shell. There are three additional ways to 
register your information:

A-3 

Registration and Safety Notices

For information on safety-related problems, you can also call 
Transport Canada’s Road Safety Dept. at: 1-800-333-0371.

Online:

 www.djgusa.com/registration/carseat/can

Telephone:

 1-800-544-1108

Mail:

 

Send your name, address and your child

 

restraint’s model number, manufacture   

 

date, date of purchase, and line code to:

 

Dorel Juvenile Canada

 

873 Hodge, St-Laurent, QC  H4N 2B1

 

Attn: Consumer Relations

Please do not send in your registration card if you have 
registered your child restraint online.

4359-4117C

Consumer:

  Just fill in your name, address and email.  Please print.

Client: 

Simplement inscrire votre nom, adresse et courriel. S.V.P. imprimez.

Tear Off and Mail This Part or Register Online

Your Name/

Votre nom:

Your Street Address/

Votre adresse:

City/

Ville:

Province

Postal Code/

Code Postal:

Email Address (optional)/

Courriel (optionnel):

Détachez et postez cette partie ou enregistrez en ligne

Model 

Number

Line 

Code

Manufacture 

Date

4358-5974A CAN Scenera ENG.indd   5-6

4358-5974A CAN Scenera ENG.indd   5-6

10/23/14   8:57 AM

10/23/14   8:57 AM

Summary of Contents for Deluxe Cruiser































Reviews: