Cosco CHG-150R, Owner'S Manual

Page: 9 / 14

- 8 -
Assembly Instruction
Fig.4
a. Attach the part(#7) to the part(#2) using the part(#25) and (2)M10*80 Hex Bolts(#86).
Insert the Sleeve(#59) into the part(#7).
Screw the Knob(#57) to the part(#7).
b. Attach the part(#29) to the part(#9) using (4)M6*20 Hex Bolts(#79).
c. Insert the part(#9) through the sleeve(#59), adjust to desired height and release the Knob(#57) to lock the
part(#9) in place.
d. Insert the
φ
60 Plug(#49) into the part(#8), and then attach the part(#8) to the part(#7) using (1)M12*85 Hex
Bolt(#87). Insert the Pin with ring(#62) through the first hole of part(#7) for locking the part(#8). The Second
hole for releasing the part(#8).
e. Insert the
φ
25 Plug(#53) into the end of parts(#22), and then insert the part(#22) through the part(#7,#8), as
shown in above figure. Slide the
φ
80*160 Foam Roller(#47) onto the part(#22).