Cosco 4131A, Owner'S Manual

Page: 13 / 19

12
and you continued setting by pressing ENTER, the computer will beep twice to remind you the setting
is saved.
c. During setting, press STOP to exit.
d. If you want to revise or delete all customized program setting data, press “PROGRAM” key will delete
all sections data, TIME window will shows 10minuter.
e. Press “MODE” button to save setting program data to computer, lattice diagram window will shows all
the setting speed data, time window will shows total operation time, incline window will shows the
incline for setting 1.
f. Once all data is saved, Press “START” to operate these set programs, press “STOP” to ready status.
Hand pulse: in non-exercise status, hold both of your hands on the pulse sensors, the LCD will show
the index, the heart shape light will show the pulse twinkling.
Malfunction:
Computer’s indication for the malfunction of speed /incline sensor.
A. E01: Speed failure. After the treadmill starts, if there is any speed malfunction, it will stop after
running for 6 seconds. Computer will back to ready status and time window shows “E01”. Any
operation for the computer will be wasted.
B. E02: Overload current failure. After the treadmill starts, if there are overload current in the motor, it
will stop and speed window shows “E02”.
C. E03: Correspond failure. When computer and driver fail to correspond, the speed window shows
“E03”.
D. E04: Current source failure. When there is failure of the current source in the driver, the speed
window shows “E04”.
E. Incline failure: if the computer doesn’t detect incline, incline window will show”--“, you can press
i/- keys to control incline, for examining and repairing the treadmill.
Program graphics: