Cosco 4131A, Owner'S Manual

Page: 11 / 19

10
please press “”, “incline-“or START to make it back to 0%.
When treadmill running, press STOP to pause status, the data remains in computer, to press START,
the treadmill keeps running. Press STOP twice continually, the data will be deleted, the treadmill keeps
in stop status. When treadmill keeps in pause status for over 5 minutes, it will be turned into stop status.
Manual operation:
A.
when computer is ready, press the START button, the time will count down 3 seconds, then the
treadmill starts, the initial speed is 1 km / h and incline is 0%. The LCD will show the speed and incline
accordingly. Adjust the speed and incline by pressing speed and incline buttons on computer. The
speed will increase by 0.2 km / h and incline by 1 each time.
B. Dot matrix display: display number of track and current position.
Preset program operation
This treadmill has 18 preset programs. P1-P5 is weight losing program. P6-P10 is stamina reaching
program. P11-P12 is stamina exercising program. P13-P15 is stamina remaining program. P16-P18 is
body recovering program.
a. Press “PROGRAM” to enter automatic program status, the LCD will show program 1 and the speed
diagram. It shows total time, and incline for this program.
b. Press” Speed+ / i" or "speed - / incline -" to select your favorite program, press” ENTER" to
confirm.
c. The time window shows program preset total time. Press -/+ to change program running time (The
scale is 10-59 minutes.), press ENTER after setting.
d. Press “Start” to enter program status. The time starts to count down. When changing different
programs, it will produce beep sound. When the time descends to zero, the speed slows down and
the treadmill stop.
e. During program running, you can press “Speed –“or “Speed +“to change speed, press “Incline –“or
“I“to change Incline. When it comes to the next section, it will show the initial data of this
section.
Manual setting mode:
Manual setting mode is for user to set time, distance and calorie.
A. Time setting (scale: 1-60 min)
Under ready status, press MODE, until time window twinkle, press “SPEED//-“ to set time.
Press ENTER to confirm. It will enter distance setting if not setting.
B. Distance setting (scale: 0.1-99KM)
DISTANCE window will twinkle, press “SPEED/I/-“ to set distance. Press ENTER to
confirm. It will enter calorie setting if not setting.
C. Calorie setting: Calorie window will be flickering, press “SPEED/I/-“ to set calorie, press
Enter to confirm setting.
D. TIME, DISTANCE, CALORIE window twinkles, press START to operate.
If there is no setting of time, distance, calorie, these window will add up. Otherwise, they will count
down. When finishing count down, the treadmill will stop and back to ready status.