background image

This restraint is certified for aircraft use only when used
with the internal harness. Do not use as a belt-positioning
seat because aircraft seats do not have shoulder belts. Use
on forward-facing aircraft seats only and in a position
where the lap belt can be tightened securely.This child
restraint is installed in an aircraft seat the same way it is
installed in the vehicle.
Use the child restraint only with F.A.A. certified equipment.
Contact the airline prior to taking a child restraint on
board in order to comply with their specific regulations.

4

WARNING

!

Secure the top anchorage strap (tether)

provided with this child restraint as specified
in both the vehicle and child restraint
manufacturer's instructions.

Do not remove any of the warning labels

or other labels on the child restraint.

Placing your child in a hot child restraint

may result in burns.

Read instructions for other warnings.

5

Registration and Recall Information

Aircraft Installation

Warm Weather Use

To avoid your child being seriously burned, take
the following precautions:

1. Park in the shade or where sun does not 
directly hit the child restraint.
2. Cover the child restraint with a sheet or blanket
when not in use.
3. Check for hot seat and buckles before placing child in
child restraint.

Child restraints could be recalled for safety reasons.You
must register this restraint to be reached in a recall. Fill out
the registration card attached to the child restraint or send
your name, address and the restraint’s model number and
manufacturing date to:
Dorel Juvenile Group, Inc.
P.O. Box 2609, Columbus, IN 47202-2609 
Attn: Consumer Relations or call 1-800-544-1108
You can now register your child restraint online at
www.djgusa.com. Please do not send in your registration
card if you registered your child restraint online.
For recall information, call the U.S. Government's 
Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-
424-9153), or go to http://www.NHTSA.gov.

Summary of Contents for 22859

























Reviews: