- 8 -
Assembly Instruction
Fig.3
a. Insert the Guide Rod(#5) into the part(#2,#3).
Note: the tube end with a nut must locate at the top, as shown in figure.
b. Slide the part(#59,#61,#60) onto the Guide Rod(#5) in turn..
c. Set the Weight Plastic Bushing(#62) onto the Weight Selector Bar(#64) and attach it at the first hole of the
Weight Selector Bar(#64) using the Weight Pin(#63). Insert the Bar(#64) into the hole of Weight Stack(#61).
Slide the Top Weight Plate(#60) onto the Weight Stack. Set the Weight Washer(#66) onto the socket of Top
Weight Plate(#60). Insert the “L” Pin(#65) through the Bar(#64) to obtain desired weight.
Note: Carefully slide the Weight Plates(#61) one by one onto the guide rods, do not lift more then you can
control safely.
Summary of Contents for CHG-402
