background image

GB

 

IMPORTANT: RETAIN FOR FUTURE REFERENCE.  

 READ CAREFULLY. YOUR CHILD’S SAFETY MAY BE AFFECTED  
 IF YOU DO NOT FOLLOW THESE INSTRUCTIONS

user guide

Thank you for choosing a Cosatto product. Please take a little time to read the important safety 
notes detailed below. This will ensure many years of happy, safe use.

safety: take note

WARNING: A CHILD’S SAFETY IS YOUR RESPONSIBILITY

 

WARNING: Do not place this child’s cot near heat sources, windows and other furniture.

 

WARNING: Do not use the cot if any part is broken, torn or missing and only use spare parts

  provided by Cosatto.

 

WARNING: Do not leave anything in the cot or place the cot close to another product which

  could provide a foothold or present danger of suffocation or strangulation, e.g. strings,  

 

  blind, curtain cords.

 

WARNING: Do not use more than one mattress in the cot.

 

The cot base is the safest in its lowest position and the cot MUST be assembled with the  

 

  mattress base in the lowest position as soon as your child can sit up unaided.

 

The thickness of the mattress used shall be such that the internal height (surface of the 

  mattress to the upper edge of the cot frame) is at least 500mm in the lowest position of the  

 

  mattress base and at least 200mm in the highest position of the mattress base (See parts page).

 

All assembly fittings should always be tightened properly and care should be taken that no  

 

  screws are loose, because a child could trap parts of the body, or clothing (e.g. strings,
  necklaces, ribbons for babies’ dummies), which could pose a risk of suffocation and 
  strangulation.

 

To prevent injury when the child is able to climb out of the cot, the cot shall no longer be used    

  for that child.

 

Recommended mattress size 120 x 60 cm from the Cosatto range or no less than a 

  minimum size of 118 x 58 cm.

 

All assembly fittings should always be tightened properly and regularly checked and 

  retightened when necessary.

 

If you leave the child unattended in the cot, always make sure that the movable side is closed.

 

The safety of the cot could be adversely affected by fitting flammable drapes.

 

The cot is only ready for use  when the drop side mechanisms are engaged, check the 

  mechanisms are fully engaged before use.

 

Conforms to BS716:2008.

 

This product is suitable from birth up to the age of approximately 3 years.

GB

Summary of Contents for HUGO COT

















Reviews: