CORVUS TERRAIN T21 User Manual Download | Manualshive

Page: 70 / 84

background image

We reserve the right to modify the product and the design.

70

USER

MANUAL

PRODUCT LIABILITY

SUPPLEMENT SUBJECT TO PRODUCT LIABILITY DIRECTIVE 1999/34/CE OF 10/05/1999

1. The User Manual has been delivered to the customer or to his or her legal representative when they have taken delivery of the product. A contact person

has been appointed to respond to queries.

2. The product has been presented to the client (legal representative) before it was handed over. The client (legal representative) has been informed that

the product should be used only in accordance with the conditions laid down by the manufacturer (as described in the User Manual). The client (legal

representative) fully understands the instructions.

3. The client (legal representative) has been informed that the manufacturer shall not be liable for problems resulting from any modification of the vehicle.

4. The client (legal representative) declares by their signature that they have been informed and that they understand the points set out above.

Date and signature of the client (legal representative).

«
...
68
69
70
71
72
...
»

Summary of Contents for TERRAIN T21





















































































Reviews:

No comments

Related manuals for TERRAIN T21

Brand: CadKat Pages: 11

Brand: WABASH COMMUNICATIONS Pages: 47

Brand: Dongfang Motor Pages: 28

FourTrax Foreman TRX500FE2 2018

Brand: Honda Pages: 279

Brand: Honda Pages: 229

Brand: Honda Pages: 159

Brand: Honda Pages: 71

Brand: NorAM Pages: 118

CARRYALL 100 CE

Brand: Club Car Pages: 68

YXZ 1000R SS 2022

Brand: Yamaha Pages: 216

Brand: Yamaha Pages: 504

Brand: Yamaha Pages: 422

Brand: Yamaha Pages: 156

Brand: Yamaha Pages: 140

Brand: Zap Pages: 27

Brand: Landoll Pages: 62

Brand: Yamaha Pages: 374

Brand: Winget Pages: 282

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands