Fig. 4
Audio cable
Fig. 5
AUX Jack
Installation 2: Convertibles
XM module located on console (waterfall) rear end between
seats
1.
Remove two 15mm Torx screws from cover
2.
Remove 3 plastic pins from carpet panel
3.
To complete the rest of the install, proceed to
step 3 of installation 1
4.
Secure module and proceed to next section.
Pairing
Pairing process varies among devices but basic steps are the same. This
process is done upon initial install and will not have to be repeated.
1.
Turn Ignition and r
adio “ON”
LED inside module peephole will flash (pairing mode)
2.
On audio device: Go to
Bluetooth Settings
3.
Tap
Bluetooth
and turn on.
4.
Tap
Scan (Search) for devices
.
5.
Wait for Bluetooth device name to appear and select it (See below),
LED inside module peephole turns solid (paired)
