Corvalent Q35SBC, User Manual, Page: 41 / 61

Security Setup
CMOS Password Support
Two Levels of Password Protection
CMOS set-up provides both a Supervisor and a User password. If you use both passwords, the
Supervisor password must be set first. The system can be configured so that all users must enter a
password every time the system boots or when CMOS Setup is executed. The Supervisor and User
passwords activate two different levels of password security. If you select password support, you are
prompted for a one to six character password. Type the password on the keyboard. The password
does not appear on the screen when typed. Make sure you write it down. If you forget it, you must
drain NVRAM and reconfigure.
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Exit
Security Settings
Supervisor Password :Not Installed
User Password :Not Installed
Change Supervisor Password
Change User Password
Boot Sector Virus Protection [Disabled]
Configure Settings
During System Boot.
←
Select Screen
↑↓
Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
V02.61 © Copyright 1985-2006, American Mega trends, Inc.
41