- 9 -
Step 4
1.
Take out the Pulley (73) preassembled on the weight frame (1).
2.
Take the ball head of the cable (72), install following the arrow instruction.
3.
Fixed the ball head of the cable (72) on the Guide plate (5) with Fixed bush for cables (48).
4.
Lock back the Pulley (73) to the weight frame (1).
5.
Insert the Magnetic cross pin with wire (56) into the screw of cable (72), then tighten it on the
Pull rod (51).
Step 5
Lock the Front block cover (57) and Rear block cover (58) tightly in the weight frame with Cross
head screw (22).
Summary of Contents for Omega LGC-10
Page 5: ... 4 Exploded Drawing ...
