Section Eight: Time Display Modes
Changing the Time Display Mode is as simple as pressing the
Time but-
ton
to toggle between elapsed and remaining time. Elapsed Time shows
how much time has past since the beginning of the track, and Remaining
Time shows how much time is left before the track is over.
You may press
Time
to change the Time Display Mode for both sides. If
you wish to change the Time Display Mode on both sides press
Shift+Time
.
When the Time Display Mode is changed, you will also notice that the
Progress Indicator will also change to reflect either Elapsed Time or
Remaining Time.
Pitch Control, Pitch Bend, and Pitch Ranges
The Pitch Control allows you to speed up or slow down the playback of a
track by a desired percentage. The HDTT-5000 offers Pitch Ranges of
4, 8, 16, and 24%, in order to provide a wide level of flexibility when
manipulating digital music files. In all modes, 0.05% Pitch Resolution can
be achieved, allowing for a more precise level of adjustment.
To toggle Pitch On or Off (the unit will not respond to pitch changes
when Pitch is Off), press both the
Pitch Bend (+)
and
Pitch Bend (-)
but-
tons simultaneously. The LED indicator will illuminate when Pitch has been
turned On.
To change Pitch Ranges, press
Shift
+
Pitch Bend (+)
OR
Pitch Bend (-)
buttons simultaneously. The Pitch Display on the LCD screen of that
respective side will momentarily display the new Pitch Range.
For a momentary change in Pitch, the
Pitch Bend (+)
and
Pitch Bend (-)
buttons will temporarily increase or decrease pitch relative to the amount
of time either button is held down.
When the Jog Mode is not engaged (LED remains unlit), you may also
use the
Jog Wheel
to perform a Pitch Bend.
Key Adjust and Master Tempo
The Key Adjust and Master Tempo controls allow you to have independ-
ent controls of Key Adjust and Tempo. When Master Tempo and Key
adjust are enabled, the
Pitch Bend (+)
and
Pitch Bend (-)
buttons
become Key Adjust buttons, with a range of +-5 half steps, displayed in
Sharp/Flat for +/-, and the Pitch Slider and Jog Wheel control Master
Tempo and Master Tempo bend.
To enable
Master Tempo
and
Key Adjust
, first you need to press the
Master Tempo
button. If you press
Key
alone
Key
will not be enabled,
and must be turned on within
Master Tempo
mode.
To disengage Key Adjust, simply press the Key Adjust button at any time,
and the Key will return to it’s original value. To return to Pitch mode sim-
ply press Master Tempo or press
Pitch Bend (+)
and
Pitch Bend (-)
. If
Key adjust is enabled then that will be turned off as well at this time.
Reverse
When enabled
REVERSE
will start playing the music backwards until dis-
engaged.
Time Display and Pitch Control
Fig 8.1 - LCD Display and progress indicator in time elapsed
Fig 8.2 - LCD Display and progress indicator in time remaining
Fig 8.3 - Pitch On/Off by pressing both buttons simultaneously.
If in Master Tempo Mode doing this will return the unit to Pitch.
Using the HDTT-5000
19
Fig 8.4 BPM, Key, Master Tempo and Reverse Buttons.
Progress indicator