Cortelco C58 User Manual Download

Page: 53 / 81

8.3.4.2

FEATURE

This page configures various features such as Hotline, Call Transfer, Call Waiting,

etc.

Field Name

Explanation

Do Not Disturb

If enabled, the phone will reject incoming calls. The callers receive

busy tone. Outgoing calls may be made.

Enable Call Transfer

If enabled, Call Transfer is allowed.

Semi-Attended

Transfer

If enabled, Semi-Attended Transfer is allowed.

Enable Auto

Handdown

If enabled in speakerphone mode, the phone will automatically hang

up and return to idle when the distant party terminates the call. In

handset mode, it will play dial tone instead of returning to idle.

Auto Handdown Time

Wait time before the phone performs the Auto Handdown behavior

described above.

Enable Auto Redial

If enabled, the phone will automatically redial a call if a busy tone is

received.

Auto Redial Interval

Wait time between auto redial attempts in seconds.

Summary of Contents for C58


















































































Search results

Summary of Contents for C58

Reviews:

Related manuals for C58

Brands by name

Popular brands

Cortelco C58, User Manual

Search results

Summary of Contents for C58

Reviews:

Related manuals for C58

Brands by name

Popular brands