corsan CMB7141 Trino, Mounting Manual

Page: 27 / 42

CMN006 Fiber Konekto Slim
CMN001 Fiber Konekto
Moun ng and maintenance manual
Overhead shower arm screw in to earlier prepared connec ons. When all connec ons are
mounted and secure to the wall, you can assembly overhead shower, and hand shower with the
hose.
Before installa ons of the shower tap, flush the water thru the water pipe. This will clean all the
dirt which were in the tap and could cause the problem with proper func onality of the product.
A en on!!!
The wall where will be mounted the shower tap should have the water connec ons with spacing
150mm and diameter ½” and addi on connec on for concealed overhead shower. Hot water
should be on the le -hand side, and cold-on the
right . Between standard water connec ons,
should be placed addi onal valve for water going thru to the overhead shower. To properly
prepared water connec ons screw middle connectors which are added in sets of accessories.
Firstly screw connec ons for overhead shower, and then a ach tap box on outstanding
threaded connec ons and screw the security nuts from the bo om of the box with hex key. This
ac ons which will prevent the tap box from slipping form the connec ons.
Please put a en on when screw the nuts! - Improper tools can scratch or damage chrome layer.
DO NOT use for cleaning any product base on ammonium, alcohol, acetone, acids or other
substances with abrasive func on. This can cause damage of the surface of the product and
excluded it from the warranty claim. For cleaning we strongly recommend only water with soap
and so cloth to dry. Improper way of cleaning and maintenance can lead to worsen of first look
of the product.
Maintain and clean properly the shower column minimum once for quarter or each me
when the turn catch will start working heavily. This will secure proper and long func onality
of the pro
duct.
Remember!!!
25