© Corroventa Ltd.
2017.07
17 (31)
Open the network menu on the machine which is to be
master, i.e. control the others.
Press Create and wait while the machine establishes
the network. This can take up to one minute.
Once the network has been established, the display
switches between the slave units in the network menu.
These are indicated by type (e.g. A4) and bus address
(e.g. 101).
To change the settings for a slave unit, press Change
and select the slave unit. The background lighting for
the selected unit starts to flash to confirm that the unit
has been selected.
Desired settings can also be made directly on the
relevant machine.
Start the master machine when all desired settings
have been made. The slaves start automatically within
one minute. The machines are stopped in the same
way. Press stop on the master machine and the slaves
stop automatically shortly afterwards.
As the network is controlled by the master machine, a
slave unit that is started manually is stopped when the
master machine is in standby. In the same way, a slave
unit that is stopped manually is restarted manually
when the master machine is in operation.
Setup and maintenance menus
The setup and maintenance menus contain functions
that are not needed for normal operations.
Date and time
: Setting system date and system time:
The format is YY:MM:DD / HH:MM.
Language:
Language selection for the interface.
Menu system:
The menu system is set to Advanced as
standard with all functions visible and available. If it is
set to Basic, the more advanced functions are removed
from the menu system.
Keylock
: Option to activate/deactivate the keylock:
RH hysteresis:
Option to adjust the hysteresis settings
for control mode RH. The setpoint's position in the
operation interval and the hysteresis value can be set
from here.
