manualshive.com logo in svg

CORRECT CRAFT ski nautique 200cg, Owner'S Manual

Looking for an Owner's Manual for your CORRECT CRAFT Ski Nautique 200CG? Look no further! Download the comprehensive manual for free from our website, providing you with all the essential information you need to enjoy your water adventures to the fullest. Get yours now at manualshive.com.

Share
Download
background image

4-62

There is a fuel tank located under the deck behind the stern seat.
To inspect the hose connections, remove the stern seat leanback.
Your Nautique dealer should perform all fuel tank service.

Section 4

Explosion or fire can occur under certain

conditions, causing death or serious injury:

• Turn the engine OFF.

• DO NOT smoke or allow open flame or sparks within

50 feet (15 meters) of the refueling area.

• DO NOT refuel unattended, avoid contact and spilling.

• DO NOT refuel indoors.

• DO NOT use a plastic funnel.

• DO NOT allow any spilled fuel to remain on your boat’s

finish.

• DO NOT allow a fuel system problem to go unchecked.

• Always maintain contact with the fuel nozzle and the

fuel tank to prevent electrostatic spark.

!

Summary of Contents for ski nautique 200cg























































































































































































































Reviews:

No comments

Related manuals for ski nautique 200cg

Hobie Fx One Illustrated Parts Manual preview
Fx One
Brand: Hobie Pages: 27
Hobie 15 Club Owner'S Manual preview
15 Club
Brand: Hobie Pages: 27
Solstice Durango 29635 Owner'S Manual preview
Durango 29635
Brand: Solstice Pages: 12
Incept K50D Pacific Manual preview
K50D Pacific
Brand: Incept Pages: 4
Decathlon Kayak Itiwit X100 2P Manual preview
Kayak Itiwit X100 2P
Brand: Decathlon Pages: 108
Bavaria VIRTESS 420 Owner'S Manual preview
VIRTESS 420
Brand: Bavaria Pages: 90
Malibu Boats 21 VLX Owner'S Manual preview
21 VLX
Brand: Malibu Boats Pages: 309
Access Dinghy Sailing 303 Single Seater Owner'S Manual preview
303 Single Seater
Brand: Access Dinghy Sailing Pages: 12
Sabre Sabre 30 Owner'S Manual preview
Sabre 30
Brand: Sabre Pages: 81
Nautica Boats Nautica 450 RACE User Manual preview
Nautica 450 RACE
Brand: Nautica Boats Pages: 20
Feathercraft K2 Expedition Double Manual preview
K2 Expedition Double
Brand: Feathercraft Pages: 31
PATHFINDER 2200-V Tournament Edition Owner'S/Operator'S Manual preview
2200-V Tournament Edition
Brand: PATHFINDER Pages: 10
Yamaha WaveRunner VXS 2014 Owner'S/Operator'S Manual preview
WaveRunner VXS 2014
Brand: Yamaha Pages: 98
NorthStar 260 CCD - Brochure preview
260 CCD -
Brand: NorthStar Pages: 2
Yamaha WaveRunner FZR 2012 Owner'S/Operator'S Manual preview
WaveRunner FZR 2012
Brand: Yamaha Pages: 104
orangemarine OMA-P5080-040401 Handbook preview
OMA-P5080-040401
Brand: orangemarine Pages: 16
Sea-doo 2001 LRV Operator'S Manual preview
2001 LRV
Brand: Sea-doo Pages: 68
Ocean Kayak Classic Big Game Specification Sheet preview
Classic Big Game
Brand: Ocean Kayak Pages: 1

Brands by name

Popular brands

Load more brands