36 of 121
CORRADI SPA
- USER MANUAL - PALLADIA
20.05.2013
PRODUCT FEATURES
NON COMPLIANCE/ DEFAULT
The beams may present vertical stripes of different shades. This is normal and is due to stacking that occurs
inside the autoclave during the impregnation treatment (the beams are spaced apart by transverse beams).
The presence of resin is a characteristic of coniferous wood.
A dimensional variation of wood products after exposure to moisture is normal. The reference humidity for
the measuring is 12% (defined in the UNI EN390: 1997).
FLOOR
The floor may dent in collisions or falling objects and the implementation of concentrated loads on a small
area, such as chairs with wheels, high heels and ladders is not suitable.
The floor can scratch as a result of contact with small objects such as nails or stones present beneath the
soles of shoes.
At the time of delivery, the floor may be different from that of the samples after exposure to light which
causes a change in the wood color.
MOTORS
Electrical system: it must be performed by a licensed electrician who shall issue a certificate of conformity
of the electrical system.
The system has to have an appropriate degree of protection being installed outside. A licensed electrician is
able to properly size the system and choose the right components (adequate IP protection).
Any voltage drop or radio interference may result in loss of the limit switches of the engines. In this case it is
necessary to proceed with a new programming as indicated in the Manual.
S T A I N L E S S
STEEL
The components in stainless steel require no maintenance. The appearance of micro-oxidation, most
frequently in maritime environments characterized by salt spray, does not affect the quality and durability
of the product such oxidations are believed to be normal. In case you need to remove these oxidized points
you can use a steel wool or a metal bristle brush (in stainless steel). The protective film of chromium oxide
(autopassivation) will reset in a natural way with the only exposure to air, without any intervention by the
user.
ALUMINIUM
The presence of marks and scratches is considered a fault only if these are visible at a distance of 2 meters.
If the signs and/or dents are visible at a distance of 2 meters these are to be
considered a defect.
Do not use acid to clean the painted aluminum, but only mild soap and water.
FINISH
Orange peel: the surface of the coating film has an uneven look like orange peel.
Blistering: bumps on the surface of the coating film in various sizes and frequency.
Sagging of the outer layer: localized and well defined irregular accumulations of
coating products, in the form of rounded edges and shallow that affect the outer
layer.
Posting - Veneer: the coating film lifts from the substrate in form of small flakes
PRODUCTS
FEATURES
