2
Heavy Duty Height Adjustable Arm with 3rd Support Post(28-EI-RSRC)
Notice:
Due to the weight of Diagnostic Monitors, specific heavy
duty tilter/vesa plate, arm and mounting cup must be used for
this equipment. In addition, a specially designed support post
(that correctly accommodates mounting of the heavy duty cup/arm
assembly) is also required and must be in place directly beneath
the monitor/arm assembly. The instructions below present the
specific parts and steps required to mount a larger scale Diagnostic
Monitor including instructions for converting an existing support
post (part# 28-EI-3-RSRC) that might be used as part of the
installation.
Note:
It is critical and a requirement that any diagnostic monitor in
excess of 35 pounds be mounted per these instructions.
