2. Packaging
3-position charging stand
Instruction manual
3. Battery level indicator
Battery status is shown on
the pipet controller display.
If the indicator displays three
“bars”, batteries are fully charged.
If the indicator does not display
“bars” the batteries are discharged
and require charging.
4. Charger
IMPORTANT:
The pipet controller may be charged only
with the original charger.
The mains voltage shall conform with
the charger specification (Input: 100-240V,
50/60Hz, 0.2A; Output: 9V).
Charging the battery through a charger
is carried out by direct connection
to the main power.
Batteries charging is indicated by successive
lighting of “bars”.
Universal charger with set
of adapters (Cat. No. 4996),
is supplied with the Corning®
Stripettor™ Ultra Pipet Controller
(Cat. No. 4099).
Do not plug the
charger to the pipet
controller while
charging on the
stand
Note:
Do not plug the
charger to the pipet
controller while
charging on the
stand
Note:
2. Charging Stand Options
Do not plug the
charger to the pipet
controller while
charging on the
stand
Note:
AUS adapter
US adapter
UK adapter
EU adapter
Do not plug the
charger to the pipet
controller while
charging on the
stand
Note:
Do not plug the
charger to the pipet
controller while
charging on the
stand
Note:
2. Charging Stand Options
Do not plug the
charger to the pipet
controller while
charging on the
stand
Note:
