18
Step 5
Insert the radio node into the mount bracket.
Step 6
Push as much cable back through the wall or ceiling as possible. The mount bracket assembly
has room for some cable slack.
Installing the Radio Node (Method 2)
Use this method with the 1.25 inch bracket when routing an exposed Ethernet cable directly to the radio node.
To route the cable openly and mount the radio node
Step 1
With two user-provided screws, attach the mount bracket assembly to a wall or ceiling. The
screw holes are sized for an M4 (#10) or larger screw. Ensure the screws have a snug fit onto
the studs, sheetrock, anchor, or other material you are bolting onto and that you match the
screw head with the appropriate cutout hole size on the bracket.
If needed, use a flat washer between the bracket and screw head to ensure a secure fastening.
shows the 1.25-inch mount bracket.
Figure 14
1.25-Inch Mount Bracket
DRAFT
