![CORNING LSE 6755 Instruction Manual Download Page 5](http://html1.mh-extra.com/html/corning/lse-6755/lse-6755_instruction-manual_2668613005.webp)
1 PRODUCT DESCRIPTION
1.1.1.4 Extent of supply
Following parts are supplied as accessories with each centrifuge:
•
1 Instruction manual (included with each centrifuge)
1.1.1.5 Warranty
The centrifuge has been subjected to thorough testing and quality controls.
In the unlikely case of any manufacturing faults occurring, the centrifuge and rotors are covered by
warranty for a period of two years from date of delivery.
This warranty becomes invalid in case of mishandling, damage and negligence and further in case of
usage of inappropriate spare parts and / or accessories or unauthorized modification of the unit.
Technical modification rights are reserved by the manufacturer in respect to technical
improvement.
1.2 Installation
1.2.1 Installation of the centrifuge
1.2.1.1 Unpacking the centrifuge
The Corning LSE™ Compact Centrifuge is supplied in a carton.
Remove the strap retainer, open the carton and remove the centrifuge. Remove all material inside unit.
The instruction manual must always be kept with the centrifuge.
1.2.1.2 Space requirements
The centrifuge should be installed on an even and solid surface, if possible on a laboratory cabinet /
table or some other solid vibration free surface.
In order to enable a safe and smooth operation, level the centrifuge with a spirit level.
The centrifuge must be placed in a way, that there is a minimum space of 30 cm on each side of the unit
in order to ensure necessary heat dissipation.
Do not place the centrifuge next to a window or a heater, where it could be disposed to excessive heat,
as the performance of the unit is based on an ambient temperature of 23°C.
Safety regulations require that the safety area of 30 cm around the unit is marked in order to indicate that
neither hazardous substances nor persons should be within this area during centrifugation.
1.2.1.3 Installation
Follow these steps:
•
Check whether power supply corresponds with the one named on the manufacturer's rating
label which is mounted on the rear panel.
CLS-EQ-104 October 2013 , Document 01, Revision 02