2 OPERATION
2.2.7 Starting the centrifuge
After closing the lid you can start the centrifuge with the key “start” (3).
By the key “start’ (3) you can start runs with manually pre-selected parameters.
When the respective pre-selected running time has ended then the centrifuge will stop automatically or
you can interrupt the run in the mode “cont” with the key “stop” (2).
Photo 16
2.2.8 The “STOP” key
By the “stop” key (2) you can interrupt the run at any time. After pressing the key the centrifuge
decelerates with the respective pre-selected intensity down to stand still.
Photo 17
2
3
2
CLS-EQ-104 October 2013 , Document 01, Revision 02
