Cornell CTP-E45T User Manual Download Page 6

 

 

 Functions

 

 
Reboil Button:

  

In the mode of temperature preservation, if the water tasted of chlorine, press 
"Reboil' button. The water boiling indicator will turn on. The temperature 
preservation indicator light of the previous setting will keep blinking. After the 
water is boiled, the unit signals with a sounds and the water boiling indicator 
will go off. The unit will automatically turn into mode of temperature 
preservation once again. Time required for re-boiling is 2-3 minutes. 
 

Temperature Preservation Button: 

After the unit is powered on, the default preservation temperature is set as 
85°C. While the water is boiling, the set temperature preservation display will 
flash. After the temperature drops to the temperature preservation 
temperature, the temperature preservation display will stop flashing. 

To change this temperature, just press 

the “TEMP SELECT” button. The Keep 

Warm temperature may also be pre-selected to the following:- 

  60

 O

C  (for 

baby’s instant milk formulas or warm drinkable water) or  

  85

 O

C  (for coffee, tea and preparation of some soups) or  

  98

O

C (for instant noodles and other beverages requiring   higher 

temperatures) 

Smart Cool Function 

This function is used to stop the norma

l “Keep Warm” function. It will help        

to save the electricity, especially at night. Press the temperature select     
button till the indicator goes to the smart cool function.

 

Once the water is 

boiled, the water will start to cool down until lukewarm temperature where it is 
suitable for immediate drinking when dispensed from the thermo pot. 

 
Lock/Unlock Button:  

When the unit is in operation, the safety lock will be locked. The lock cannot  
be unlocked during the course of water boiling. Press the Unlock button in the 
mode of temperature preservation and the unlock indicator turn on to indicate 
it is unlocked. Now the user has three options to dispense the water from the 
thermo pot. It will be automatically locked if there is no operation within 20 
seconds and the Unlock indicator will go off. 
 

Summary of Contents for CTP-E45T










Reviews: