Cornell CSM-8007HP, User Manual

Page: 4 / 6

3
1. Insert the beaters (dough hooks) first at mixer head. The
beaters (dough hooks) with gear must insert at the correct slot
then, press and twist until the beater (dough hook) clicks into
position.
2. Press the tilt button to turn the mixer head unit upwards. Place
the mixing bowl onto the base.
3. Place mixer head at mixer stand and insert it into the slot at
lock button until it clicks into position.
4. Then press the tilt button to lever down the mixer head unit.
5. Switch on the appliance beginning from the lowest
speed “1”.
6.
Increase the speed as desired until “5”. Maximum operating
time must be less than 5 minutes.
7. For additional
power, press the “turbo” button for maximum
speed. The Max. Turbo operating time must be less than 1
minute.
8.
After use, reset the speed control to position “O” and switch off.
9. To disconnect the beaters (dough hooks), press tilt button to
turn mixer head upward, then press lock button to take out the
mixer head. Press eject button to remove the beaters (dough
hook) mixing bowl also can’t take out.
10. Always unplug from the power supply when you have finished
and before cleaning.
Note: This unit is fitted with circuit breaker. This Circuit
breaker will stop the machine immediately if the
machine is overheated. User need to cool down the
machine before reusing it.
Caution: The maximum load for mixing flour is 300 grams of
flour with 150 grams of water , the proportion must
not be exceeded.”
Operating Instructions