7
If the problem cannot be solved after referring to the above
guides, please contact the nearest service center or their
representatives.
The iron is not hot
enough.
Wait until the pilot light
goes off before ironing.
Water is over the
“Max” position.
Discard some water.
Too little
steam
Inadequate water.
Fill in water to the
correct level.
Blockage in the water
tank or soleplate
holes.
Clean (set the
temperature dial to
max temperature, set
steam control to
“ ”
position.)
Spraying
function does
not work
Air in the water pump.
Stop up the spray
nozzle, then press
spray button several
times.
No water or
insufficient water.
Fill in water.
Summary of Contents for CSI-E220SRD
Page 1: ...0 Steam Iron CSI E220SRD ...
Page 10: ...9 ...
