Cornell CSI-E220SRD, User Manual

Page: 5 / 10

4
Fabric
Temperature
control
Ironing methods
Synthetic,
Fibres,
Nylon
·
Iron the reversed side first.
Do not use the spray function
as spraying could cause
stains.
Silk, Wool
··
Iron on the reversed side to
prevent shiny spots.
Cotton,
Linen ···
Set the steam control to
“ ”
position.
Filling iron with water
1. Set the steam control to
“OFF” (no steam) position.
2. Hold the handle to set iron to a leveled position and fill in
water through the water inlet.
3. Fill the water tank with filling cup. Note: Never fill the water
exceeding
the “MAX” level.
4. Wipe clean any water outside of the water tank. When finish
ironing, please empty the water tank.
5. Normal tap water can be used. However, it is advisable to use
distilled water.
Steam ironing
1. Fill in water according to the filling method above.
2. Insert the power plug into the electrical outlet (ensure correct
voltage).
3. Set the temperature control at the required position, but steam
ironing is only possible at higher ironing temperatures and
“Max” setting. Water may leak from the soleplate if
temperature is too low.