Cornell CJX-SP450, User Manual

Page: 5 / 6

4
Using Your Grinder
When you receive your Cornell the appliance will already be assembled in juicer mode.
1. Lift the safety clips from underneath and pull outwards until the clips are facing down.
2. Lift off the feeder chute lid and remove the juice-extracting tray and filter.
3. Insert the accessory connector, make sure the raised sections are outwards facing and are in line
with the safety clips.
4.
Separate the Grinders’ base from its cup by holding the base and turning the cup anti-clockwise.
Turn the base upside down and fill the cup with the desired contents, then re-assemble the Grinder
base by turning clockwise.
5. Insert the complete Grinder into the accessory connector and twist anti-clockwise until the Grinder is
secure.
6. Once you have finished grinding twist the Grinder clockwise and pull it away from the cup. The
Grinder can now be used to sprinkle the food that has been ground.
7. This attachment is ideal for use with nuts, coffee beans and etc.
1. If the juicer is left idle for a long duration, it is advisable to store it in a well-ventilated place to prevent
its motor from getting damp.
2. Do not wash the motor with water. Wipe it with a piece of dry cloth.
3. Disassemble the juicer blades. Lubricate the blade shaft and bearing with oil every month.
4. Use warm water and mild detergent to wash the juicer. Rinse and dry thoroughly.
Cleaning and Maintenance