Cornell CHT-P152, User Manual

Page: 5 / 7

4
Operating Instructions

Fill the kettle with water as required. You may refer to the water
level indicator as reference. Do not fill water exceeding the “MAX”
mark.

Position the kettle on the base unit and connect to the mains
electricity.

Press the
boiling switch to “I” to start operating. The boiling
indicator light will be illuminated.

You may interrupt the boiling process at any time by switching off
the power or lifting the boiling switch upwards
to “0”.

The kettle switches off automatically when the water is boiled.
The boiling indicator light will also turn OFF.

Disconnect the kettle from the mains electricity.

Do not open the lid whilst pouring as the hot steam or hot water
may splash on your hand.

If necessary, wait for 5 minutes after boiling before pouring out
the boiled water. You may press the switch again to re-boil the
water after that.

Press the keep warm switch to turn on the keep warm mode and
release the keep warm switch to turn off the keep warm mode.