Suction Line and Service Valve Assemblies Installation Instructions
Publication Number: 630460289INS
- 4 -
© 2005-2014, Cornelius Inc.
6.
Drain the evaporator water pans (a)(c) by
removing the connection tube behind the
metal evaporator support (b) (FIGURE 3).
The water MUST be drained from both
RIGHT and LEFT pan. Failure to do so will
cause the pressure transducer (which
controls the harvest cycle) to be set
improperly on start up.
DO NOT
drain the water into the ice
storage area, unless the area is
completely free of ice.
Replace the connection tube and metal
support when the pans are completely
drained.
NOTE: The water pump motor must be
protected from water splash. DO NOT
introduce water into the motor housing.
Warranty on water pump is VOID if water
damaged.
FIGURE 3
7.
Disconnect the electrical plug from the Water Fill Valve (d) and Water Dump Valve (e) (FIGURE 4).
8.
Disconnect the Water Pump plug (f) and Transducer Pressure Hose (g) (FIGURE 5).
FIGURE 4
FIGURE 5
a
b
c
d
e
g
f
